Go to HealthTreks Home




Note: Going home clears all of these panels.

Synchronize panels by clicking the panel directional buttons found at the top of the panel.

Synchronize panels by clicking the panel directional buttons found at the top of the panel.

Synchronize panels by clicking the panel directional buttons found at the top of the panel.

Synchronize panels by clicking the panel directional buttons found at the top of the panel.


Get
2007 0SR9019- Patient Replace Hip Joint with Metal Hip- Bone Cement- Open C

Life Cycle Calculation View

Life Cycle Costs Calculator

Introduction
This tool calculates life cycle cost totals for input uris. The discounted totals can include up to 10 subcosts and impacts. SubCosts for building investments might include power, electricity, taxes, repairs, maintenance, and contingency. SubCosts for health care investments might include copays, deductibles, premiums, fees, travel, lost wages, and household repairs. Impacts, such as environmental impacts, can be taken from associated life cycle analyses or other calculators.
The calculator updates the base input's OCPrice, AOHPrice, and CAPPrice with the calculated totals. The calculator does not change the base input's Units or Amounts.

Calculation View Description
Sample health care treatment cost used in a tutorial. v172a

Version: 1.2.0

Feedback About urbandelivery/input/2007 0SR9019- Patient Replace Hip Joint with Metal Hip- Bone Cement- Open C/2147397494/none

Step 1 of 4. Make Selections

Step 2 of 4. Define SubCosts and Impacts

SubCosts and Impacts

SubCost 1

SubCost 2

SubCost 3

SubCost 4

SubCost 5

SubCost 6

SubCost 7

SubCost 8

SubCost 9

SubCost 10

Step 3 of 4. Calculate

Relations

Use In Descendants?
Overwrite Descendants?
SubCost 1: Insurance Company Payment: 0.00
SubCost 2: Patient Copays, Surgery: 500.00
SubCost 3: :
SubCost 4: :
SubCost 5: :
SubCost 6: ;
SubCost 7: ;
SubCost 8: ;
SubCost 9: ;
SubCost 10: ;
Input.OCPrice: 0.00
Input.AOHPrice: 0.00
Input.CAPPrice: 500.00
Total LCC: 500.00
Total EAA: 27.71
Total Unit LCC: 500.00
Unit: each
Unit Total Amount: 1.000

Fill in investment variables

Step 4 of 4. Save

Method 1. Do you wish to save step 2's calculations? These calculations are viewed by opening this particular calculator addin.

Instructions (beta)

Step 1

  • Step 1. Real and Nominal Rates: The nominal rate includes inflation while the real rate does not. Only the real rate (with constant dollars) is used in this version of the calculator.

Step 2

  • Step 2. SubCosts: Up to 10 subcosts can be defined. These definitions refer to these subcosts as LCA elements.
  • SubCost Aggregation: The label is used to aggregate subcost. When possible, use labels contained in industry-standard Work Breakdown Schedules, or Classification systems. Because of display limitations, only 10 subcost can be displayed.
  • Name: Name of the subcost. Examples include, electricity, water, gas, taxes, contingencies ...
  • Label: Work Breakdown Structure label used to aggregate subcosts and subbenefits.
  • Price Type: Type of parent Input or Output price to update when the calculators are saved. Options include oc (Operating Costs), aoh (Allocated Overhead Costs), cap (Capital Costs), or rev (Revenues).
  • Amount: The quantity of the LCA element to be used to determine costs or benefits. Unit costs and benefits often will use an amount of 1.
  • Unit: The unit of measurement of the LCA element.
  • Price: The unit price of the LCA element to be used to determine costs or benefits.
  • Escalate Rate: Rate of price increase or decrease over the life span of the input. Will be divided by 100 in the calculations. The initial subcost or subbenefit will be multiplied by this rate and used with the linear or geometric Escalate Type property.
  • Escalate Type: Type of price escalation. Type of price escalation used to calculate life cycle costs and benefits. Use the ‘none’ option, along with the Discount Years and Salvage Value properties to determine a present value subcost or subbenefit. Use the 'upvtable' option, or uniform present value, if NIST 135-style price indexes are being used to compute escalated costs or benefits (and complete the Discount Factor property). Use the 'spv', or single present value, option to calculate a discounted cost/benefit (and complete the Discount Years property). Use the 'caprecovery' option to calculate an amortized annual cost (and complete the Discount Years and Salvage Value properties; in addition, the Discount Times property can be used to compute 'cost/benefit per hour' of use style calculations). Use the ‘uniform’ option along with Step’s 3 properties to calculate a uniform price escalation. Use the ‘linear’ or ‘geometric’ options, along the Escalate Rate property, to calculate linear or geometric series price escalation.
  • Discount Factor: A present value taken from NIST 135-style price escalation indexes. The index should be for a period that sums together the service life of the project and the planning construction years. See table 5-4 in the NIST 135 reference.
  • Discount Years: The number of years to use in single present value and capital recovery discount formulas. Used when the Escalation Type property is 'spv' (Single Present Value) or "caprecovery" (Capital Recovery).
  • Discount Year Times: The number of times to use the Discount Years property to calculate recurrent costs. Only used when the Escalate Type property is 'spv', or Single Present Value, and the Discount Years property is greater than zero. Total number of times will not exceed the service life of the investment.
  • Other Price Type: The type of price used to calculate subcosts or subbenefits. Options include none, market, list, contracted, government, production, copay, premium, incentive, penalty, fee, engineered, and consensus. When possible, use market prices.
  • Salvage Value: Used with an Escalation Type of spv and Service Life Years > 0 to calculate a discounted salvage, or residual, value. Also used with an Escalation Type of caprecovery and DiscountYears > 0 to calculate an annual capital recovery cost for operating budgets.
  • Total Cost: Not a data entry field. The final discounted cost.
  • Per Unit Cost: Not a data entry field. The final discounted cost divided by the Per Unit Amount.

Step 3

  • Step 3. Use Same Calculator Pack In Descendants?: True to insert or update this same calculator in children.
  • Step 3. Overwrite Descendants?: True to insert or update all of the attributes of this same calculator in all children. False only updates children attributes that are controlled by the developer of this calculator (i.e. version, stylehsheet name, relatedcalculatorstype ...)
  • Step 3. What If Tag Name: Instructional videos explaining the use of what-if scenario calculations should be viewed before changing or using this parameter.
  • Step 3. Related Calculators Type: When the Use Same Calculator Pack in Descendant is true, uses this value to determine which descendant calculator to update. Inserts a new descendant when no descendant has this same name. Updates the descendant that has this same name.
  • Step 3. Service Life Years: The life span of the input.
  • Step 3. Planning Construction Years: Number of years in the planning and construction period. Also known of the preproduction period.
  • Step 3. Years From Base Date: The base date is the input or output’s date. Enter an integer that specifies the specific year within the Planning Construction Years when the input is installed. The NIST reference uses examples that are installed in 1 year and given a value of 1 for this property. A project with a Planning Construction Years greater than 1 would insert whichever year within the period when the input is actually installed.
  • Step 3. Target Type: The Benchmark option is used to define a baseline, or benchmark, input. The Actual option is used to define the actual results for an input. The Full Target and Partial Target options are used to carry out progress and goal-related analyses.
  • Step 3. Alternative Type: Type of alternative used in the comparison of different inputs.
  • Step 3. Per Unit Amount: An amount used to derive per unit costs. For example, a 1000 ft2 (m2) house would use a value of 1000.
  • Step 3. Per Unit Amount: A unit used in per unit costs. For example, a 1000 ft2 (m2) house would use a value of ft2 (m2).

Summary Costs

  • Individual SubCost or SubBenefit: The total discounted cost or benefit derived from running the calculator.
  • Total Discounted OC, AOH, and CAP prices: Sum of the discounted subcosts that will be added to parent input.
  • Total Life Cycle Cost: Sum of the Total OC, AOH, and CAP costs.
  • Total Equivalent Annual Annuity: Amortizes the life cycle cost over the service life years, using an equivalent annual annuity discounting formula.
  • Total Per Unit Cost: Total Life Cycle Cost divided by the Per Unit Amount.
  • Per Unit Unit: Unit of measurement for the Total Per Unit Cost.

References

  • Hallam, Eidman, Morehart and Klonsky (editors): Commodity Cost and Returns Estimation Handbook, Staff General Research Papers, Iowa State University, Department of Economics, 1999
  • Lippiatt: BEES 4.0, Building for Environmental and Economic Sustainability Technical Manual and User Guide. US Department of Commerce, National Institute of Standards and Technology. NIST 7423. 2007
  • National Institute for Standards and Technology Handbook 135: Life-Cycle Costing Manual. 1996 Edition. US Department of Commerce
  • United States Government Accountability Office: Applied Research and Methods. GAO Cost Estimating and Assessment Guide. Best Practices for Developing and Managing Capital Program Costs. March, 2009.

Current view of document
DevTreks -social budgeting that improves lives and livelihoods
Input Group
DRG469- Major Joint Replacement or Reattachment of Lower Extremity
Input
2007 0SR9019- Patient Replace Hip Joint with Metal Hip- Bone Cement- Open C
SubCost Name SubCost Amount SubCost Unit SubCost Price SubCost Total SubCost Unit Total SubCost Label
Total OC Total AOH Total CAP Total LCC Total Unit Total EAA
Unit Amount Unit Total Unit Cost Service Life P/C Years Yrs From Base Date Altern Type Target Type
Insurance Company Payment 0.000 contracted price 11600.000 0.00 0.00 OSR9019I1
This is the contracted price negotiated between the insurance company and hospitals. This cost estimate is for patient out-of-pocket expenses, so the amount is zero.
Patient Copays, Surgery 1.000 payment 500.000 500.00 500.00 OSR9019I1
This is the copayment paid by a patient for hip replacement surgery.
Totals 0.00 0.00 500.00 500.00 500.00 27.71
1.000 each 500.00 20.00 0.00 0.00 accepted
Description : Sample health care treatment cost used in a tutorial. v172a
Input Series: 2007 0SR9019 -Patient Replace Hip Joint with Metal Hip- Bone Cement- Open C
Insurance Company Payment 0.000 contracted price 11600.000 0.00 0.00 OSR9019I1
This is the contracted price negotiated between the insurance company and hospitals. This cost estimate is for patient out-of-pocket expenses, so the amount is zero.
Patient Copays, Surgery 1.000 payment 500.000 500.00 500.00 OSR9019I1
This is the copayment paid by a patient for hip replacement surgery.
Totals 0.00 0.00 500.00 500.00 500.00 27.71
1.000 each 500.00 20.00 0.00 0.00 accepted
Description : Sample health care treatment cost used in a tutorial. v172a
Dataset: 2007 0SR9019- Patient Replace Hip Joint with Metal Hip- Bone Cement- Open C IRI Sample data set used in a health care analysis tutorial.









Uploading a new file will replace any existing file. If necessary, please package and download the existing file prior to this action. If the file has been uploaded successfully, this page will refresh and show the new file information. If the file can't be uploaded (i.e. exceeds 60MB, unsupported mimetype, bad xml, bad html) this page will refresh and show the existing file information.

The file has been uploaded.